Because of my deep love for
coral, the pieces that I loved the most from the Dolce & Gabbana summer 2013 runway show were the ones made with rafia and coral embellishments.
The dress in the center will be the one getting
the DIY treatment
I didn't dare to sew magillions of tiny beads and coral parts on it: therefore I took a shortcut, with a similar final effect.... ready?
Because it's still early in the season, I couldn't find a tunic or a dress to modify.
So I made my own.
I used linen fabric in natural color.
The base dress: pattern
I cut out two pieces of fabric with a trapeze or "A" shaped line, based on a similar dress that I own.
Because I'll most likely use this as a bikini coverup, I didn't want to have a zipper: it's a loose fit, that I can pull on easily, and I added a little shape by having a fold in the top part of the back that will be let open in the bottom part, two darts reprises to give a little waist, and two reprises in the front for the breast.
Note: once the two parts will be sewn together, the bottom need to be cut shorter on the outer edges of the "A" to make sure that you'll have a straight edge once it's on.
I had my mom helping me with a ruler while I was wearing it, and marking with pins all around.
The"not-coral" embellishments
Let dry (overnight - since this kind of lace is quite thick) and press the lace embellishments on reverse and on the right side, to make sure that the dye is perfectly set.
I then proceed to divide one of the appliques in several parts (because of the way these are made they won't fray and I'll be able to use the parts as small appliques rather than buying more small ones)
Adjust all the appliques on the front and back part of the dress to create your design.
Just pay attention to symmetry.
If you're going to modify an existing dress, it's better to take the seams apart.
Sewing all the motifs while flat makes it much easier.
Once you're happy with the design, pin in place and sew. (I took a picture of the arrangement, then pin and sew the big one in the center first, and proceed to pin and sew one at the time).
(I ended up not using the small three flowers with leaves.)
Because I wanted some of the motifs going across the shoulders, I first sew the part on the front and back, then sew together the shoulder seams, press it flat, and finish with the appliques.
 |
| Patiently sew along the edges and in some of the inner parts of the bigger pieces to secure in place. |
The frayed edges
I used a
Rotary Cutter
to cut 5 strips along the selvage of the fabric:
two of the size of the bottom parts of the dress, 1-1-4" wide
two to fit around the sleeves 7/8" wide
and one to fit around the neck. 7/8" wide
Sew a zig-zag stitch just on the selvage to secure the edge.
The linen fabric will fray very easily, just use a needle to pull from the side the horizontal fibers, and keep pulling the fibers until you reached the zig-zag stitch on the selvage.
In case you're going to modify an existing dress: you can buy a
fringe trim.
I sew a zig zag stitch around the edges that will have the fray trims on, and then bast the trim in place and sew it on using
Twin Needles Size 80 - 3.0mm.
and here it is my Dolce&Gabbana inspired dress:
Иримед: у меня в дневнике уже есть видео по этому виду вязания, но этот курс мне очень понравился тем, что все показано последовательно и очень понятно.
here
).
, applied both on the front and on the back side with a sponge.
