Шитый пояс (ручки для сумок)

Пятница, 17 Мая 2013 г. 13:37 + в цитатник

Цитата сообщения AZAROVA_MARINA

Прочитать целиком В свой цитатник или сообщество!

Шитый пояс (ручки для сумок)

http://forum.hwaml.com/t175922.html

Step 1. Take a strip of plain fabric and fold it in half with wrong sides facing. Lightly press the folds in the middle of the strip.

Step 2. Start times and use of the folds in the center of the strip as a guide for times and LONG RAW edges of the cloth toward the center fold. Press.

Step 3. Repeat steps 1 and 2 using a strip of patterned fabric. (In the photo below, I used bias binding Kettle for this band of tissue ... you need size 22mm offset mandatory maker 2 "wide strip.)

Step 4. Take a simple strip of open and folded edges. Place of band interaction on the other side of the center strip.

Step 5. Re times the plain strip so that the interaction is included.

Step 6. From the wrong side of the plain and patterned stripes facing, pin stripe patterned on a plain strip. Make sure that the patterned strip and still largely above the plain strip.

Step 7. Sew strips together to sew about 1 / 8 "from the edge of one side of a patterned strip.

Step 8. Sew 1 / 8 "from the edge of the opposite side of the patterned strip.

Step 10. Sew lace trim on the belt by stitching close to one long cut.

Step 11. Slip D-rings at one end of the belt so that the flat edge of the D-ring sitting on the patterned side of the belt.

Step 12. Fold the raw edge of the belt under 1 / 4 ", and then again for the D-ring about 1 / 2". Pin in place.

Step 13. Sew the folded edge across the belt as close as possible to the D-rings as you can get. You may find it easier to use a lightning pace on the sewing machine, sew close to get to the D-rings.