STEP SEVEN: Continue the center front cut line through the hem of your towel, as shown. STEP SEVEN: Stay on the line to cut the center front edge of the towel, as shown.
(Note: You COULD do things in a different order -- skipping steps three and four until after five, six and seven. I did mine this way because it was easier to fold and find the center point of my towel before attaching the other towel halves.) (Note : You can do things in a different order - skip steps three and four up after five , six and seven. I did mine this way because it was easier to fold and find the point of my towel before place the other halves towel . )
STEP EIGHT: Remove a small amount from the "underarm" area of the robe. STEP EIGHT: Remove a small amount of " under the arm " of the gown. Fold your robe right sides together and cut away a 1 1/4" width rectangle. This makes the sleeves narrower and more fitted, and also eliminates the bulky finished edge of the towel. Double robe right sides together and cut a 1 1 / 4 " wide rectangle . This makes the sleeves narrower and equipped, and also eliminates the bulky finished edge of the towel.
At this point I serged the seams where I attached the towels to each other, then topstitched the seams down. At this point I sewed the seams where the towels attached to each other , then stitched seams down. I do recommend finishing the edges to avoid fraying, but you could certainly use a zigzag stitch if you don't have a serger. I recommend finishing the edges to prevent fraying , but it certainly could use a zigzag stitch , if you do not have a serger .
STEP NINE: (not pictured) Sew the side seams on each side from the hem of the sleeve all the way around to the hem of the robe. STEP NINE : (Not shown ) Sew the side seams on each side of the edge of the sleeve all the way around the edge of the mantle. Use a 1/2" seam allowance. Serge or zigzag for a finished edge on the seams. Note: If you like, you can add twill tape loops for your robe when you sew the side seams. Use a 1 / 2 "seam allowance . Serge or zig -zag for a finished edge at the seams. Note : You can add loops twill tape your garment to sew the side seams.
STEP TEN: Cut a 1 1/2 yard length of twill tape and press it in half lengthwise, as shown. STEP TEN: Cut a half yards of length 1 twill tape and press in half lengthwise, as shown. This will be the binding for the raw edge opening of your robe. This is the link to open raw edge of your robe .
STEP ELEVEN: Carefully bind the robe opening, starting at the hem on one side (finish the ends of the twill tape by folding them inside before you sew), and continuing all the way around to the other hem. STEP ELEVEN: care to bind the coat opening , starting at the hem of one side ( finishing the ends of the tape cross by folding them inside before sewing ), and continuing all the way around the hem of others. This finishes the edge of your robe beautifully, without the need for bias tape or a facing! This completes the edge of your robe beautifully , without the need for bias tape or a face!
STEP TWELVE: Cut your remaining twill tape into two 1 yard pieces. STEP TWELVE : Cut the twill tape remaining two pieces of 1 yard. Layer them together and sew all the way around. Layer them together and sew all around. This is the tie for your robe. This is the tie of her robe .