PTFE (Polytetrafluoroethylene) is most commonly known as "Teflon" a brand name of the material produced by Dupont. It is a self-lubricating that offers the lowest coeffecient of friction of any material. It also has astonishing chemical resistance along with a service operating temperature of 500F.

PTFE tube has many applications throughout industry. The unique properties allow the tubing to solve problems possible with no other material. Compared with similar polymers it normally has the bestprice/performance ratio.

Material: Plastic
Grade: Virgin PTFE
Color: White
Shape: Round Rod
Diameter: 1-1/8 inch
Length: 24 inches
 

PTFE Tube by Extruded, Molded and Filled. Extruded ptfe tubing OD from 1mm to 300mm. Molded ptfe tubing from 30mm to 600mm.Filled ptfe( Filled graphite, Filled Fiber glass, Filled Bronze, Filled Carbon ), Size OD from 30mm to 600mm.
 

Working temperature:-180 ~ +260 degree;Elongation:230% ;Tensile strength: 18 MPa;Density: 2.1~2.3 g/cm^3

Protect from keeping your heat press & garments clean from any residue on the heat plate.  Can be used well over 2,000 uses

 

• Material: PTFE(polytetrafluoroethylene)
• Teflon Roll for Heat Press
• 1 Premium Teflon Roll
• 16 Inches by 10 Yards
• Working temperature range: -200-260℃

Teflon film, made from polytetrafluoroethylene (PTFE), are widely known hydrophobic materials.Wide operating temperature range: -200-260℃;High Corrosion resistance, for most chemicals and solvents, showing an inert,resistant to acid and alkali, water and various organic solvents; Outstanding flame retardancy, Safe and reliable; Ideal mechanical properties include anti-aging properties especially for bending and wobble applications.

PTFE Film White Teflon Thin Sheet 0.5×1×0.1mm
 

• Material: PTFE(polytetrafluoroethylene)
• Color: White
• Width: 1000mm (3 ft.)
• Length: 500mm (20 inch)
• Thickness: 0.1mm(0.004 inch)
• Working temperature range: -200-260℃

Wide operating temperature range: -200-260℃;High Corrosion resistance, for most chemicals and solvents, showing an inert,resistant to acid and alkali, water and various organic solvents; Outstanding flame retardancy, Safe and reliable; Ideal mechanical properties include anti-aging properties especially for bending and wobble applications.

PFTE (Polytetrafluoroethylene) is most commonly known as "Teflon" a brand name of the material produced by Dupont.
It is a self-lubricating that offers the lowest coeffecient of friction of any material.
It also has astonishing chemical resistance along with a service operating temperature of ±500F.
 

• Material: PFTE (Teflon )
• Grade: Raw materials
• Length: 500mm
• Width:   500mm
• Thickness: 8mm
• Color: White 
• Other Size:0.2 mm;0.5 mm;More Size:PTFE Film.

Package Includes : 1pcs 500x500x8mm  PTFE Film
 

Package include:1pcs 500mm * 500mm * 0.3mm
 

• High temperature - Use working temperature of 250 ℃.
• Low temperature - with good mechanical toughness; even if the temperature drops to -196 ℃, but also to maintain a 5%elongation.
• Corrosion - for most chemicals and solvents, showing an inert, resistant to acid and alkali, water and various organicsolvents.
• Weatherability - the best plastic aging life.
• High lubrication - is a solid material in the lowest coefficient of friction.
• Not adhere to - is a solid material in the minimum surface tension, does not adhere to any substance.
• Non-toxic - with physical inertia, as a long-term implantation of artificial blood vessels and organs of the body withoutadverse reaction.
• Electrical insulating properties - can withstand 1500 volts high voltage 

Reprocessed UHMWPE can be fabricated to make wheels, component parts, pinion gears and flanged rollers. It has seen applications as diverse as railroad cars, spacecraft and hydroelectric plants.
 

Features:

* Odorless, tasteless and nontoxic
* Highly corrosive to chemicals (except oxidizing acids)
* Extremely low moisture absorption
* Very low coefficient of friction
* Self-lubricating
* Highly resistant to wear and abrasion
* Easy to fabricate and machine with common shop and woodworking tools
* Reprocessed grades, enhanced bearing and wear grades available, FDA compliant grades available for greatly extended part life
* Reduced maintenance costs and energy consumption
* Extends equipment life

UHMWPE is a common machinable plastic known for durability, versatility and cost-effectiveness as well as abrasion, impact and chemical resistances. UHMWPE plastic features a molecular weight that ranges from 3.1 million to 100 million grams per mole, with an abrasion resistance that continues to improve as molecular weight increases.

Reprocessed UHMWPE is an eco-friendly and economical alternative to standard virgin UHMWPE that uses a blended version of virgin and recycled UHMWPE. Reprocessed UHMWPE is excellent for non-food applications and offers all the benefits of standard UHMWPE at a much more cost effective price. Reprocessed UHMWPE features the same low coefficient of friction as standard UHMWPE while also offering a slightly better wear resistance. Reprocessed UHMWPE is used extensively for chain guides, wear rails, chute liners, truck liners, hopper liners and many other applications where excellent wear properties are required. The standard color of reprocessed UHMWPE is black.

Rod Stock, Black Virgin, UHMWPE Rod, Black Color, Diameter 1/2 In, Length 6 Ft, Diameter Tolerance +0.060/-0.000 In, Length Tolerance +0.060/-0.000 In, Min. Temp. Rating -22 Deg. F, Max. Temp. 180 F, Tensile Strength 5800 PSI
 

Standards: -	Max. Temp. (F): 180
Item: Rod Stock	Material: UHMW-PE
Color: Black	Length Tolerance: +0.060/-0.000"
Type: Black Virgin	Min. Temp. (F): -22
Tensile Strength (PSI): 5800	Impact Strength (Lbs.): -
Length: 6 Ft	Diameter Tolerance: +0.060/-0.000"
Diameter: 1/2"	Country of Origin (subject to change): United States

Fluoropolymer Tubing is specifically designed for more critical, low and medium pressure applications. Most of this tubing is designed with translucent to transparent materials making it easy to see fluids flow.

Material: Fluoropolymer
Tube ID: .170"
Tube OD: 1/4"
Maximum Operating Pressure: 165 PSI at 72°F (22°C)
Maximum Temperature: 300°F

Applications: Fluoropolymer tubing is of food quality and provides excellent resistance to aggressive and corrosive agents as well as high temperatures.
Construction: clear; FDA compliant materials.

Fluoropolymer Tubing 1/4" OD x .17" ID
 

Material: Fluoropolymer
Tube ID: .170"
Tube OD: 1/4"
Length: 25' roll
Wall Thickness: 0.031
Maximum Operating Pressure: 165 PSI at 72°F (22°C)
Maximum Temperature: 300°F
Weight (lb): 0.7

Applications: Fluoropolymer tubing is of food quality and provides excellent resistance to aggressive and corrosive agents as well as high temperatures.
Construction: clear; FDA compliant materials.

1/2X260" PTFE Seal Tape, Pack of 25 1/2" x 260", Virgin White PTFE Thread Seal Tape, 0.4 Density, 0.003" Thickness, Temperature Range -400 Degrees Fahrenheit To 500 Degrees Fahrenheit.

Color: Multicolor
Assembled Product Dimensions (L x W x H): 2.00 x 2.00 x 1.20 Inches
 

PTFE Ring Outside Diameter : 55mm / 2.16";
Ring Inner Diameter : 39.5mm / 1.55"
PTFE Ring Height : 6.3mm / 0.248";
Color : Black & Brown
Net Weight : 14g
Package Content : 1 x Piston Ring Seal

The PTFE Seal ring for pistons. Composed of a PTFE wear-resistant ring and an O-ring. With its elasticity, the O-ring can offer compensation for the wear of the PTFE ring. Applied to the sealing of hydraulic cylinder piston.
 

PTFE, or Polytetrafluoroethylene, is a fluoropolymer that is resistant to heat and chemicals. PTFE is inert to mostly all chemicals and is considered the slipperiest material in existence. It has an extremely low coefficient of friction, and is used as a coating on cookware, gaskets, seals, and hoses. It is unaffected by virtually all acids and caustics, functioning in environments up to 500°F, and as low as -350°F. Virgin PTFE is approved by the Food and Drug Administration for use in the food, beverage, cosmetics and pharmaceutical industries.
 

Features:
 

• Extremely low co-efficient of friction
• Excellent chemical and weather resistance
• Great electrical insulator
• Great thermal stability and operating temperature range
• Resistant to chemicals and moisture
• FDA approved for food handling (Virgin)

PTFE is a low friction fluoropolymer with outstanding chemical and weathering resistance. The working temp range is -20°F - 500°F. It has the lowest coefficient of any solid. It has no slip-stick characteristics; static and dynamic coefficients are equal. Nothing sticks with any strength to unheated surfaces. Both virgin and mechanical grades are UV stabilized.


Polytetrafluoroethylene (PTFE) is a high molecular weight polymer, one of the most versatile plastic materials known and can be used for applications where other materials can't be used.

The most outstanding characteristics are:
* high heat resistance
* high resistance to chemical agents and solvents
* high anti adhesiveness
* high dielectric properties
* low friction coefficient
* non-toxicity


Advantages of PTFE Rod:Coefficient of friction is incredibly low. Maximum working temperature of +260 degrees C (+300 degrees C for short periods).Minimum working temperature -260degrees C.Outstanding electrical insulation properties......
 

PTFE has a unique combination of properties that make it weatherable and also good for use in high temperature and electrical insulation applications. PTFE is chemically inert and also possesses a low coefficient of friction and excellent non-adhesion properties.
Product Features

Shape: Rod
Material: PTFE / Teflon
Diameter: 5mm / 0.2in
Length, in: 80cm / 2.62ft
 

Description
 

• Teflon PTFE rods are made with virgin Teflon PTFE resins, this Material has a slippery surface and surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures. It resists most solvents and is also an excellent electrical insulator. 

Features
 

• Teflon rod surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures
• Teflon PTFE rods resist most solvents and is an excellent electrical insulator
• Teflon PTFE rods can be used outdoors
• Temperature range : minimum -350F to maximum 500F

Additional Information
 

• Shipping Weight: 182
• Product Dimensions:
• Width: 9.00
• Length: 13.00
• Height: 2.00

PTFE is High molecular weight polymer composed by Carbon and Fluorine based on the polymeric chain -CF2=CF2-. This material is a soft, low friction fluoropolymer with outstanding chemical resistance and weathering resistance.
Mechanical properties can be improved by adding fillers such as glass fibers, bronze, carbon, and graphite.

PTFE is one of the most versatile plastic materials known and can be used for applications where other materials can't be used. The compressive strength at a certain predetermined compression value is one of the most significant mechanical characteristics of PTFE, in a wide range of service temperatures.

Its mechanical properties are low compared to other engineering plastics, but its properties remain at a useful level over a great temperature range (-400° to 500° F).

 

• Material: PTFE Teflon
• Shape: Rod
• Diameter: 1 inch
• Length: 24 inches
• Finish: Smooth
• Product Weight: 1.60 lbs

Poly-Tetra-Fluoro-Ethylene is a fluorocarbon-based polymer and is commonly abbreviated PTFE. The Teflon® brand of PTFE is manufactured only by DuPont.

Several other manufacturers make their own brands of PTFE which can often be used as substitute materials. This fluoroplastic family offers high chemical resistance, low and high temperature capability, resistance to weathering, low friction, electrical and thermal insulation, and "slipperiness".

(Teflon® PTFE and Teflon® FEP & PFA Specifications) PTFE's mechanical properties are low compared to other plastics, but its properties remain at a useful level over a wide temperature range of -100°F to +400°F (-73°C to 204°C). Mechanical properties are often enhanced by adding fillers (see paragraph below). It has excellent thermal and electrical insulation properties and a low coefficient of friction.

PTFE is very dense and cannot be melt processed -- it must be compressed and centered to form useful shapes.
 

Max Temperature Pressure Rating	1440 psig (99.2 bar )
Min Temperature	-65°F ( -53°C )
Max Temperature	450°F ( 232°C )
Room Temperature Pressure Rating	3000 psig ( 206 bar )

Hose Color	Natural
Hose Inside Diameter (in)	0.187 in.
Hose Length (ft)	10.000
Hose Material	PTFE
Hose Size	-4 AN
Maximum Operating Pressure (psi)	3,000 psi
Outer Material	Braided stainless steel
PTFE Lined	Yes
Quantity	Sold individually.