Created by-Ahmed Delaney

Sudden or ongoing plumbing problems can damage your home as well as your belongings. The following tips can help you diagnose and repair any plumbing problems you encounter.





To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.

If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. A.P.E.S. can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

If your toilet's water level is low, the toilet is clogged up, and using a plunger isn't resolving the issue, hold a bucket filled with warm water at about your waistline, and pour it into your toilet. This procedure can be repeated if the water level again returns to a level that is too low.

If you have a shower head that needs replacing, be sure to get one that is good quality. Some people think that one shower head is like any other, so decide on price alone. However, they are inexpensive for a reason, this being that they are cheaply made and tend to break a lot easier.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder click over here around the joint, and use a propane torch to solder the replacement section into place.

Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your "sweating" pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.

One way to avoid a common plumbing problem is to make sure never to flush anything but human waste and toilet paper down a toilet. Other things made of paper like tissues, paper towels, and the like do not dissolve the same way toilet paper does and can get stuck.

Ensure the toilet is free of any leaks. Check for leaks by putting a few drops of food coloring into the tank of each toilet. Look at the bowl carefully. If you notice colored water in several seconds, then you know your toilet is leaking badly, and you need to fix this as soon as possible.

To keep the pipes in your kitchen in tip-top shape, avoid pouring fats or cooking oils down the drain. These liquid fats solidify in the pipes and create clogs. As an added protection, wipe congealed grease from pots to further avoid creating clogged drains. By following these tips, you can help avoid a plumbing disaster.

Never pour grease of any kind down your kitchen drains, especially grease from animal sources, which tends to harden rather quickly. The grease can congeal in your pipes and cause disastrous clogs and back-ups. It's better to dispose of grease in the trash to keep your drains flowing well.

If you need to shut off your plumbing system, turning off the main valve is not enough. A leaking sink will still be supplied by the water that remains in the pipes. Make sure you check all the pipes for signs of wetness or leaks. You should do this regularly.

Keep an eye on your monthly water bill to catch plumbing problems. Has your water bill gone up recently, even though nothing's changed? This could indicate a water leak or appliance problem somewhere inside or outside of your home. Check under sinks for rusted pipes, look for water puddles under outside faucets, and consider having a plumber come out to listen to your pipes to detect running water.

When it comes to plumbing a great choice is to invest in brass fittings. Sure, they may be more expensive upfront, however their longevity is amazing compared to the alternatives, so you end up saving money. As an added bonus, the brass fittings look so much better than the other alternatives.

You can save money on a plumber by using a power auger yourself to clear a clogged toilet line. Check with local home improvement stores or other venues where you can rent power tools. You may be able to rent an auger yourself for a fraction of the cost of hiring a plumber, although you will have to be able to remove and reset your toilet yourself if you do not have a main line cleanout.

To keep your drains moving freely and free from gunk and buildup, pour a half cup of baking soda followed by a cup of white vinegar down each drain once a month. The foaming action helps to push stuck substances through the pipe, while the vinegar neutralizes odors. You can follow this solution with a kettle of boiling water for extra cleaning power.

Take special care to reconnect the drainage pipe if necessary after installing your water heater. This could be one of the recirculation pipes, which helps your water stay warm without wasting it.

As you now know, dealing with plumbing is not as hard as you may have thought. Once you understand the basic principles, the rest is easy as screw, twist, and flush. All you need are some tools, patience, curiosity, and no fear of manual labor. Use these skills in tandem with the information you learned here, and you will have the job finished in no time.