Article created by-Mccarthy Mejer

Taking a step into the wondrous and complex land of plumbing for the very first time might feel a bit daunting. However, by keeping the helpful tips listed below in mind, you will soon find yourself plumbing on par with some of the best plumbers in the field and maintaining your own easily.

You don't want to end up with frozen pipes, so take preventive action, such as wrapping outside pipes with insulation, and keeping indoor temperatures above freezing at all times. If the temperature surrounding the pipes is anywhere below freezing, this can cause the pipes to freeze. In the best case scenario, you will have to wait until they thaw so that the water runs again. However, your pipes can explode, as well - making a huge plumbing bill.

Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.

Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.

Periodically check your pipes for leaks and cracks. These can be forgotten, since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.

Do not ignore a slow flushing toilet. This is usually a sign that something is wrong. It can also cause backups and overflows. The most common causes of a slow flushing toilet are sediment build up, tank malfunctions, or partial clogs. You should periodically check for these problems.

Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, http://finance.azcentral.com/azcentral/news/read/40941064 must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your "sweating" pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.







Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what's left of the tab gets washed into the bowl. This can then end up clogging the toilet's port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

If you have a crack in your toilet tank, you can sometimes fix this with an epoxy resin. However, it is very difficult to keep up with this type of maintenance, and the best bet may be contacting the supplier and ordering a new tank to be installed in your bathroom. Nevertheless, keeping some epoxy resin on hand for emergencies is a good idea.

If you have a foul odor coming from your garbage disposal, this is due to food debris buildup. You need to put ice cubes, orange peels, and lemon peels into the disposal and run for about 30 seconds. Next, run some liquid dish soap through the disposal. This should take care of the problem if there is not a substantial blocking buildup.

Be sure that you check on your water meter when it is not being used. Then, check on the meter 8 hours later. If the meter has changed, even a small amount, this could be a sign that there is an undetected water leak, which can be a severe problem.

Keep from using harsh drain cleaners. They have chemicals in them that are corrosive and can harm your pipes if they are poured down them frequently. Call a professional if you notice your drain is still clogged up.

Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.

Mold growing at the base of your toilet can indicate that condensation is forming on your toilet bowl thanks to room temperature versus bowl and water temperature, or that you have a leak in the wax seal around your toilet. To replace the wax seal, turn off the water to the toilet, disconnect from the water supply and then lift the toilet and replace the ring. The real trick is setting the toilet back down on the ring correctly. Buy an extra ring in case you mess up and to avoid having to run to the hardware store in the middle of the job.

It is important to clean your faucet's aerator from time to time. Not cleaning it can cause lime buildup, which in turn, could cause water leaks or low water pressure. To clean a aerator, you can unscrew it from the faucet, dip a brush into vinegar, and use the brush to clean it.

In conclusion, you know that it is more than significant to obtain reliable and helpful information when it comes to plumbing. Read This method is important and so is the work that you do. Go out and use the advice provided here and be assured you are doing the right thing.