Content by-Singh Bengtsen

Anytime you have a plumbing problem, you do not need to get stressed out. This article will give you some tips to learn how to handle plumbing problems. Remember to take your time when fixing anything yourself so that you do not cause any further damage from happening to your pipes.

Avoid plumbing problems! Do not stop up the toilet! Some common items that will stop up a toilet include: toys, hair, paper towels, birth control items, and feminine personal products. Do not flush these items down your toilet - unless the instructions say otherwise! These can stop up your toilet - to the point that nothing else will work - except calling a plumber!

Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.

Install screen traps or drain covers on all of your sinks and tub drains. Most home plumbing calls are about clogged pipes. These can be caused by debris, especially hair, washing down the drains. Putting in a trap means that you can clean this debris off before it ends up in the pipes.

Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.

Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your "sweating" pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.







In cold climate areas, sometimes the pipes in the plumbing system freeze. You can thaw them out without calling a plumber. Before beginning this process, open the faucet and begin thawing closest to the faucet and then move down the line as sections thaw out. One method you can use is to wrap the pipe with a heavy towel or burlap and then pour hot water over it, set a bucket underneath to catch the water.

If you have drains in your house that have not been used for a long period of time, pour one gallon of water through them to keep them functional. Furthermore, this will have the added benefit of reducing any odors from entering your house from lack of use during the year.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.

Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don't want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.

If you are looking to get new piping in your home, try to stay away from copper ones. Copper tends to have problems, due to water and soil corrosion. It is also harder to install these kinds of pipes. Steel or lead pipes tend to offer the best quality and are the most durable.

Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank's ball or flapper.

If you are the kind of person who travels a great deal, then remember that different countries may have very different kinds of plumbing systems available. If you are not sure of how things work in the region where you experience problems, then you should either do research or avoid fixing the problem yourself.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

Always try plunging any clogged toilet or drain before snaking. Snaking can often push problems further down the pipe and make matters worse. Drainage Pipe Greenwood uses nothing but your strength and water pressure to help clear clogs. For https://sites.google.com/view/midwest-plumbing/greenwood plunging, boil some water and pour into the affected drain or toilet to help loosen things up before plunging.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

If you are not able to shut off a main valve to your home before you leave for vacation, shut off the individual valves under the sinks and behind the toilets. Be sure that the valves are in good working order before you make the mistake of turning one that is ready to be broken at any time.

Once or twice a year, drain a few inches of water from your water heater using the valve located at the bottom. The water may be rusty-looking or brown, which is the point of this practice; sediment settles to the bottom of the tank and rests there. Flushing some of this sediment from the tank can extend the lifespan of your hot water heater.

Hopefully this article helped you learn a little bit more about your plumbing and how to stop issues before they start. By learning and knowing, like was discussed in this article, you can be sure to save a few dollars every year. Plumbing disasters can cost a lot of money, so use this advice well!