Authored by-Walker Battle

Home plumbing is a modern convenience! Indoor plumbing means you do not have to live by a creek or use an outhouse. However, keeping this luxury functioning - where and how you want - without drowning everyone in your home can be an interesting challenge! Read on for some advice on controlling the flow of water in your home.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. https://www.prnewswire.com/news-releases/oklahoma-...ring-and-summer-301269530.html can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your "sweating" pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.

Stay away from drain cleaners if possible. Drain cleaners use abrasive chemicals that are not only harmful to you but also to your pipes. Call a professional if you notice your drain is still clogged up.

Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you'll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.




To prevent pipe banging when you turn on the water, think about rubber blankets or straps. Instead of assuming the pipes need replaced, consider anchoring them or buffering them. If your pipes are plastic, leave them some room for expansion and contraction. If pipes do not leak but just make noise, eliminate the noise.

If you live in an area that sees routine freezing temperatures, make sure you do something to keep your pipes from becoming frozen as well. There are a wide variety of ways you can keep your pipes from freezing, which will help you avoid damage to your home and costly repairs.

Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.

Do not shock yourself! Water and electricity do not mix well! If you are working with both electrical and plumbing issues at the same time, then you must avoid crossing them. Beware! The two together can be deadly! When water and electricity are mixed, the risk of getting a shock can be incredibly high, as well as deadly.

The most important plumbing tip you need to know is -- how to turn off your home's main water supply. Once the water is shut off, you can investigate problems and figure out how to resolve them. Walk the family through the house and show them where all the water shut-off valves are, and how to use them.

To clear mineral deposits from your showerhead, try a soak in white vinegar. Simply add a cup or two of vinegar to a plastic bag and tape it around the showerhead, ensuring that it is submerged. Leave the bag on for an hour, and the vinegar will dissolve the mineral build-up, allowing water to gush through like it was when it was new.

If you need to get a new toilet, be sure you go with a trustworthy brand. http://www.yelmonline.com/stories/yelm-home-inspec...staying-warm-this-winter,95562 are more likely to break down easily and you will end up having to buy a new one. If you are unsure of which brands are good, ask the salesperson in a home improvement store.

If you cannot turn off your main water valve before leaving on vacation, turn off the individual valves for the toilets, sinks, and washing machine. If the valves do not look like they are in good working order, then leave them on and that will be something that you need to have changed when you return.

There are a lot of amateurs in plumbing, so if you're a pro, you might want to get an apprentice. Apprentices will work for less, and you also get the fulfillment of passing down information to your successor.

Kitchen and bathroom plumbing is often located on exterior walls and freezes more easily than interior wall plumbing. Keep your furnace at a safe temperature throughout the winter and open cabinet doors in bathroom vanities and beneath kitchen sinks to expose the pipes to warmer room air to prevent freezing.

When you have a plumbing problem that comes up in your home, you do not necessarily have to pay a plumber a lot of money to come out and fix it for you. The helpful points you learned in this article will enable you to care for basic plumbing maintenance and repairs around your home yourself.