.

　　8, the plate skin is not connected.
Cause: knife too high too low, knife seam and into the knife hanging wheel with bad, yin and yang noodles.
Solution: Adjust the knife height, knife seam and inlet knife hanging wheel, change wood.

There is a card veneer peeling machine to the development of the timber industry has played an important role, with the addition of wood machinery, many manufacturers in the choice of wood treatment machinery is also a difficult problem, so how can you choose to high-quality wood treatment machinery? Like a card veneer peeling machine by the vast number of customers pro-gaze, why this equipment will be recognized by the vast number of consumers? What are the main reasons?
First, according to the knife Bed shift sensor detection data, real-time high-speed calculation of the feed speed of the knife bed, planing woodcutter skin thickness uniform, high precision, smooth surface.

Second, the cutting thickness can be set continuously, 0.1mm thickness error, to meet the needs of different specifications.

Third, the speed range is 1.00-600.00hz, fast closed-loop control, fast response, high precision, fully meet the requirements of rapid feed in the late stage of rotary cutting.

At the time of the 0Hz, the starting torque can reach 150% rated output, ensuring that the motor has a strong cutting force at low speed heavy cutting.

V, simple structure, low cost, high reliability, simple installation and debugging, easy to operate workers.

With the increasing scarcity of forest resources, the comprehensive and efficient utilization of wood resource has become an important subject in woodworking equipment manufacturing industry and wood processing industry.
At present, multilayer board manufacturers in the single-board production process, the use of traditional clamping veneer peeling machine processing, this processing method is high precision, good quality.
However, due to the existence of Carcen, the diameter of the rotary cut log in the 200mm or so, it can not be processed on the card veneer peeling machine, and when the diameter of the log is small, the stiffness of the log is reduced, the quality of the rotary cutting veneer is poor, then if the remaining wood core abandoned or processed into a woodworking core board, will result in a great waste of raw materials, thus increasing the production cost of single board.
Therefore, the manufacturers generally use the card-free round wood veneer peeling machine to the remaining wood core to spin again, so that the raw materials have been fully utilized.

"Quality is life, technology is the source, customer is God" purpose, continuous improvement, production of high, medium and low-grade CNC veneer peeling machine can adapt to the needs of different customers, first-class development speed, strict internal management and cost control, meticulous professionalism and perfect after-sales service system, For you to lift the worries, so as to ensure the high performance of the machine price ratio, so that the vast number of customers can have the best products at the lowest price, more than 20 kinds of specifications for you to choose, the following I introduce several CNC veneer peeling machine types:
1, xt1300a type card veneer peeling machine [1] ordinary [2] with gearbox type
2, xt1300b type card veneer peeling machine This model in the spinning process, without downtime can automatically change the card, greatly improve the production efficiency.

Plywood Everyone is more familiar with, now we use the furniture used in most of it is made, its aesthetics does not lose to solid wood furniture, but also improve the utilization of wood, save costs, in the present is very popular.
Plywood is composed of multi-layer wood skin superimposed high temperature suppression, and wood skin is achieved through the veneer peeling machine, so veneer peeling machine indirectly affect the quality of plywood.
Because different customers need different plywood thickness, this requires plywood manufacturers in the rotary cutting wood to proceed according to the actual situation to adjust the veneer peeling machine.
The adjustment methods are as follows:

.

　　2, the plate skin is thin and thick.
Cause: knife height or knife low, knife seam and inlet knife hanging wheel inconsistent, wood yin and yang noodles.
Workaround: Adjust the height of the knife with reference to the knife chart, adjust to the seam and hanging wheel, replace the wood.

　　1, send the power supply, the indicator light is on, the motor can not start.
Cause: Power supply phase missing or main control line virtual connection.
Workaround: Overhaul the power supply and control line and the total Stop button.

:

Typically, veneer peeling machine is set at a thickness of 1-2 mm before leaving the factory.
If you want to change the thickness of the wood skin later, you must first adjust the pressure of the veneer peeling machine.
Use the triangle ruler (500*250mm) to live on the upper and inside of the veneer peeling machine double flower roll, and use a 150 mm ruler to stand up to the value of the top of the single flower roll above the bottom of the tripod and the junction of the ruler, the leather thickness of 1-2 mm when taking the 35mm-36mm, If the leather thickness specification is less than 1 mm when the reading value increases correspondingly, such as the skin thickness specification is greater than 2.0 mm, the reading value decreases accordingly.
If you want to increase the pressure of the veneer peeling machine, add the gasket to both the single box and the blade shoulder respectively, and reduce the gasket when the pressure decreases.