Five Minutes Work To Substitute Your IPhone 6 Plus Broken Display screen
Since the display of iPhone replacement screen 6 plus has been enlarged to 5.5 inches, the opportunity of breaking it has also been enlarged. If sadly you broke your iPhone 6 plus display screen, official repair will value you as much as per week exclude the time you make the appointment. So if you are expert sufficient, changing the iPhone 6 plus broken screen yourself is a better choice. Here we are going to stroll you through a 5 minutes DIY repair guide for changing the broken iPhone 6 plus broken screen.
Cracked the iPhone 6 display? No worry! Just comply with this step by step iPhone 6 screen substitute information, it is only a ten mins work!
Please be aware: This process was done by our consultants who have years of experience of take apart telephones, and we used the half which have already got those small elements pre-assembled. This publish is in no way a reference for those who're skilled enough to repair their iPhone 6+, do that at your own risk, etradesupply will not be liable for any harm occurred during the repair course of.
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Software
Case Opening Device
Step 1. Shut down your iPhone 6 plus earlier than you do the rest. (Be sure that you’ve accomplished this before the disassembly begins, or you could trigger brief circuit of the inner components of the telephone which can harm the motherboard)
Step 2. Undo 2 screws on the bottom with the help of the Pentalobe Screwdriver. (We advocate you to use a magnetic pad for placing these screws in case losing them)
Step 3. Stick the suction cup on the bottom of the cellphone and then pull out the broken display. (If your display has already shattered badly, use clear adhesive tape to cowl the floor of the display screen to avoid any further damage)
Step 5. Disconnect the digitizer flex cable connector, LCD show flex cable connector, front going through camera connector and dwelling button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD display screen assembly with dwelling button, body and front dealing with camera, then you just need to place the brand new one on)
Step 7. Pry up the house button flex cable connector then remove the house button.
Step 9. Take out the retaining bracket, ear speaker and entrance dealing with digicam.
Step 11. Pry up the LCD again plate connector.
Notice: We strongly advocate you to test the function of the new iPhone 6 plus digitizer and LCD screen assembly before you set up it on. When you sadly get the defective part, you would ask your supplier to exchange for a brand new one.