Author-Dorsey Wilkerson

If you're a homeowner and have had to call a plumber to fix a problem, you know how expensive and annoying it can be. Wouldn't it be great if you could fix your plumbing yourself? Well, it might be easier than you think! Read on to find out how.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

In order to avoid unsightly and unnecessary clogs in your shower, invest in a drain strainer. This cost-effective addition to your shower will gather your hair before it makes it to the drain, and limit the chances that you will find yourself showering while standing in a clogged up mess.

Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn't work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don't give up!

Ensure that the overflow holes in your sinks are not clogged. Overflow holes drain sink that fill too full and may go unnoticed until they are needed. Take the time to clean out the overflow holes as you go through your house doing your regular checks for various issues.

To avoid freezing pipes in the winter, make sure to insulate any exposed pipes in you basement before winter comes. Pay extra attention to pipes near the outside walls. If you have had a problem with any particular pipe freezing in the past, apply some heat tape to insulate those pipes.

Treating your drains every month is a great way to avoid future clogs and other problems, and it's a very simple procedure. Just run one to two gallons of hot tap water down each drain in your house.







Be sure that you check on your water meter when it is not being used. Then, simply click the following site on the meter 8 hours later. If the meter has changed, even a small amount, this could be a sign that there is an undetected water leak, which can be a severe problem.

To get the best possible price from a plumber, shop around and keep notes. When you get a price quote from the first plumber you call, you can subtly mention that price to the second and see if they will beat it. If you keep doing this down a list, you can drive down the price considerably.

It is not always necessary to call in a plumber when you have a damaged section of pipe in your plumbing. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

Never flush menstrual products, such as pads or tampons, even if the box says it's okay. These products can cause major clogs in your plumbing that cannot be removed with a simple plunger. Ensure that all women in your household understand the importance of placing these items in an appropriate receptacle.

If you do a lot of work outdoors, you'll need to take frequent breaks in the shade. It's easy to forget the sun's heat when you're involved in working, but it's still dangerous.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

If you have minor ceiling stains from plumbing water damage that has been repaired, you might not have to repaint the entire ceiling. Try taking a solution of bleach and water and dabbing the area with a sponge to lighten them. Make sure you protect your hands and eyes when working over your head.

Do not put stringy or fibrous items into your garbage disposal. Substances like banana peels, gristle, or celery may not completely break down in the disposal, and may clog your pipes instead of flowing out of the waste lines as they are supposed to. When in doubt, do not try to dispose of something that may not break down completely.

If attempting a plumbing repair yourself, be sure and have plenty of buckets on hand to catch spilling water. While you may have turned off the water supply, there is always some water left in the pipes and the larger the home and more extensive the plumbing system, the more water you may encounter.

In conclusion, you do not want to find yourself stuck paying for a large bill given to you by your local plumber when it was a task that you could have easily taken care of yourself. Use visit the up coming document in order to establish a firm base knowledge of plumbing and what you can do.