Content written by-Britt Haslund

When you think of plumbing, do you just see it as a hidden and mysterious network of pipes and pumps that makes your toilets and sinks work? If so, then you are very unlikely to have a go at mauntaining or repairing the system. Plumbing is not actually that complicated, and there are many things that you can do yourself to maintain and repair your system. Read on to find out how.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

If you discover a frozen water pipe, turn on a nearby faucet so that thawed ice has a place to go. As such, bursting can be halted, saving you from even more costly damages.







If you are looking to get new piping in your home, try to stay away from copper ones. Copper tends to have problems, due to water and soil corrosion. It is also harder to install these kinds of pipes. Steel or lead pipes tend to offer the best quality and are the most durable.

Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Do not forget to check the temperature of the water heater in your house, especially if you are planning to leave for an extended period of time. You should keep the temperature no higher than 120 degrees, which will help to reduce energy use and prevent your system from burning out.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

When you're going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don't do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn't flooded.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

If you have to replace any of your shower heads, make sure that the replacement is the best one you can afford. Some people think they can get away with the cheapest version at the store. https://mgyb.co/s/0uvLy of fixtures are prone to breakage and are much less sturdy.

If the water is not going into your dishwasher, the first thing you should do is shit off the water under the sink. Chances are that you have some kind of blockage, and keeping the water turned on could actually create a bigger problem. To fix the blockage, you may need to call a plumber.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

You may want to consider tankless water heaters if you want to conserve water in your home. These kind of water heaters heat up your water as soon as it is being used, so you are not wasting energy on keeping your water hot when it is not being used.

If you own property where the temperature gets below freezing for an extended amount of time each year, you should make sure that pipes located in unheated areas, such as crawl spaces and garages, are insulated. Pipes that are exposed to the outside elements or those that are prone to freezing, should be protected by heat tape or thermostat-controlled heat cables to prevent them from freezing.

Make sure that the temperature of your home's water heater is not above 120F. On older water heaters, be sure it is not above medium settings. When temperatures get higher than 120, scalding can occur. Also, having the settings above 120F, tends to use more energy than lower temperatures do.

Keep an eye on the grout between tiles in your bathroom. Watch for cracks and areas where the grout seems to be falling out, and repair them immediately. Small grout crack issues can be easily repaired by pulling out the bad and putting in new grout. Allow any new grout to dry completely before exposing it to water.

Be sure to have a running toilet fixed as soon as you can. Having Read the Full Piece of writing running toilet uses more water, which raises your water bill. To fix it yourself, you just have to find out what the problem is and buy the supplies you need. If you can't fix it yourself, call a plumber.

Check your toilet for leaks. Once a month, put a couple of drops of food coloring in the toilet tank. After half an hour, check the toilet bowl. If the water is slightly colored, the tank is leaking. You can fix the leak by replacing the stopper in the tank. People waste a lot of water through leaky tanks, without even knowing it.

During the summer, purchase a timer that will restrict the amount of water that your sprinklers give off. Using excess water on your lawn can lead to an increase in your water bill and create plumbing issues down the road. Also, this will help to automate a manual process, saving you time and effort.

It's true that plumbing should be of utmost importance when it comes to home improvement. That said, you should not just leave it until there is a problem and then call a pro. You can learn to take care of it yourself and hopefully these tips gave you advice on how to do that.