Content author-Grossman Riddle

Plumbing issues are a headache for people who don't know how to fix them. Hiring a professional can take way too long and cost way too much for a problem that probably could have been solved without a lot of trouble, if you only knew how. Keep reading to discover ways to make plumbing repairs and fixes that much easier!

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.

Make sure you know where your home's water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.







Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.

Don't pay a plumber until the job is completed. A plumber may require some money upfront, but it's wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.

Be sure that you check on your water meter when it is not being used. Then, check on the meter 8 hours later. If the meter has changed, even a small amount, this could be a sign that there is an undetected water leak, which can be a severe problem.

Do not forget to check the temperature of the water heater in your house, especially if you are planning to leave for an extended period of time. You should keep the temperature no higher than 120 degrees, which will help to reduce energy use and prevent your system from burning out.

Frozen pipes can lead to many problems, most of them expensive to fix. So you want to avoid that at all costs. To avoid frozen pipes, make sure the temperature in your home never drops below 55 degrees. Look for any air leaks around your pipes and make sure they're sealed up.

Avoid pouring grease or oil down your kitchen sink drain. Grease and oil can build up in your pipes and cause a backup. Instead, wait for the grease or oil to cool and solidify and either throw it away or see if there's a place to recycle it near your home.

DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.

If your sewer and main lines keep clogging up, then it is very possible that you have a tree root blockage problem. There are over the counter products you can buy to attempt to get rid of this problem. This is very effective, yet the problem is usually very extensive. Therefore, it may require a professional to come out and solve the problem completely.

To protect your money from unsavory plumbers, always get a written estimate before paying a cent or committing to a project. Good businessmen know to under-promise and over-deliver to savvy customers. Once a stated number is given, it is highly unlikely that your plumber will exceed the projected costs of the project.

Use a foaming root killer, twice yearly, to remove tree roots that can bring your drains to a standstill. Foaming products fill the entire pipe with chemicals, killing roots that grow from the top of the pipe as well as the part that water flows through. They are more effective than regular root killers for this reason.

You should try using a plumbing snake or plumber to unclog a clog. Liquid cleaners that are meant to unclog the clogs in a drain could ruin the pipes. You should also use strainers to catch hair so that it doesn't go down the drain and get clumped and clog your drain.

Look at your hot water heater and make sure that the temperature is not higher than 120 degrees Fahrenheit. If it is, it could cause you to get burned or it could reduce the unit's energy consumption. If Look At This determine that the temperature is too high, adjust immediately to avoid any of these things from happening.

Look at loose tiles to see if they were caused by water damage. Loose tiles can be a warning of a leak in need of repair. In the tile area, gently press the floor or wall to detect any "give." You can deal with a problem more easily if the tiles help you find the problem early on.

To prevent pipe banging when you turn on the water, think about rubber blankets or straps. Instead of assuming the pipes need replaced, consider anchoring them or buffering them. If your pipes are plastic, leave them some room for expansion and contraction. If pipes do not leak but just make noise, eliminate the noise.

In conclusion, nobody wants to be caught off guard with plumbing issues especially in the cold winter time. Use the great advice in this article for some of the best ways to prevent pluming issues and stop them once they have started. Ideally, you will be able to understand the concepts provided here well enough to pass on to others.