Authored by-Hunter Molina

Did you know that a leaky spray head on your kitchen sink might be caused by a faulty diverter? If this peaks your interest or if you want to know more about plumbing, then you will want to read what else we have to provide in this article about how to take care of plumbing in your home.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

Watch how your toilets are flushing. If you have to jiggle the handle or if it takes too long, you might have to repair some toilet parts. Replacing these parts early may help you to save on your water bills and will save you from more expensive repairs at a later date.





At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you'll notice a these things working.

Make sure that you disconnect all hoses outside your house when the fall season hits. This is important to reduce the chance of freezing, which can cause damage to the connecting pipes. Disconnect all of your water hoses and store them safely to put your family in the best position for the fall.

Do not place items in the toilets that do not belong there. For example, if you are a female, do not throw away sanitary pads or tampons in your toilet. This could cause severe damage to your toilet that could require a plumber, or even worse, a whole new toilet!

Treating your drains every month is a great way to avoid future clogs and other problems, and it's a very simple procedure. Just run one to two gallons of hot tap water down each drain in your house.

Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. https://www.tapinto.net/roxbury/directories/all-clear-plumbing-and-drains of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.

Never hire a plumber that is not licensed, insured and bonded. If the plumbing company cannot provide you with reference numbers for their credentials, move on quickly. https://www.nytimes.com/2017/08/11/realestate/kitc...ation-tips-from-designers.html is a common question and it should be a no-brainer for them to provide them to you. If they have issues with you asking, take that as a big red flag.

Do not forget to check the temperature of the water heater in your house, especially if you are planning to leave for an extended period of time. You should keep the temperature no higher than 120 degrees, which will help to reduce energy use and prevent your system from burning out.

Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.

During the week, hair and soap can build up in your drains and can cause serious clogs. Make sure that you have strainers in each of your drains to help catch this debris so that it does not become an issue. This will help to keep your water flowing efficiently.

For people who live in an apartment complex, plumbing is often forgotten about. The first time they move into a home they are unable to resolve any minor plumbing problems, because they have never dealt with this kind of thing. It is good to get a basic understanding when moving into your first house.

Plumbing choices can come in many ways. One decision you need to make as a homeowner is to purchase a tank-less water heater. One thing to remember if you are considering a tank-less heater. You will pay two to three times more than if you purchase a tank heater.

To make sure your sump pump will run in an emergency, routinely test it by adding several buckets of water into the sump pit. The pump should turn on, remove the water and turn off with ease. Do this regularly, especially if your sump pump doesn't run that often, to ensure it will work when needed most.

If you are the kind of person who travels a great deal, then remember that different countries may have very different kinds of plumbing systems available. If you are not sure of how things work in the region where you experience problems, then you should either do research or avoid fixing the problem yourself.

To help keep your drains working properly you should pay attention to clogs. Clogs are a common problem at home but with proper maintenance and preventive measures you can avoid a messy situation. Clogs are not only an annoyance, but can also lead to overflows and water damage. So make sure you keep your drains clog-free by implementing easy preventative practices.

Homeowners in colder climates where snow and freezing is the norm should insulate all basement plumbing pipes with foam to help keep hot water hot and prevent pipes from sweating in the warmer weather. Properly insulated pipes save money on hot water heating costs and greatly reduce the chance of frozen pipes in the winter.

Take a look at your tiles for evidence of damage from a water leak. Loose tiles could be an early sign that leaks have caused damage, so press against tiles gently to see if they "give". Consider loose tiles to be an early warning system so you can schedule a repair right away.

In conclusion, it is important that you know how to take care of plumbing, but it is more important that you get your data from a reliable source. Use the great advice provided here and you will be more than happy that you took the time to do so.