Objectives:

The network shown on the diagram above doesn't have a full connectivity by itself. The full connectivity isn't needed for this lab because all actions should happen in AS 5500 on routers R1, R2 and R3. You don't need to perform a ping test to check the result caused by configuration changes. The output of "show ip route" command is going to be enough to check the results.

• Perform all necessary configuration changes on routers R1, R2 and R3 to provide redistribution to R1 150.1.50.0/24, 150.2.50.0/24, 200.50.2.0/24 and 200.60.2.0/24 networks;
  
• Using a Cisco proprietary attribute "WEIGHT" impact on BGP route decision - R1 should choose a path to 200.50.2.0/24 and 200.60.2.0/24 via R4;
  
• Using an attribute "LOCAL_PREF" impact on BGP route decision only for 150.2.50.0/24 - R1 should choose a path for this network via R5;