Authored by-Dorsey Thomasen

If plumbing is something that you find difficult or intimidating, you are not alone. Many people can't solve their own plumbing problems, which means that plumbers can charge a lot of money for even simple and quick repairs. Don't let this happen to you, read on to learn how to solve your own plumbing problems!

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

faucet leak repair columbus of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.

When starting a plumbing project that is due to loud noises in your pipes empty the pipes first. This can be an easy fix to an other wise wasted huge job. Just close the main water line and open the facets throughout the house. After why not try these out has stopped flowing turn the water on from the main source and check to see if the noise is eliminated.

In cold climate areas, sometimes the pipes in the plumbing system freeze. You can thaw them out without calling a plumber. Before beginning this process, open the faucet and begin thawing closest to the faucet and then move down the line as sections thaw out. One method you can use is to wrap the pipe with a heavy towel or burlap and then pour hot water over it, set a bucket underneath to catch the water.

Don't pay a plumber until the job is completed. A plumber may require some money upfront, but it's wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.

There are two ways to remove stubborn clean-out plugs. Try to use a hammer and chisel to loosen it. The only other option is to chisel right through the clean out plug.

If you have a lot of hair in your shower drain, be sure to get a stopper and put it in the drain. This will catch the hair from going down the drain, which can clog it. Just make sure that you remove hair that is already in the drain before using the stopper.







When you wash your hands, be sure that you have not left any soap on the faucet handles. What people do not know is that leaving soap on these fixtures can cause fixtures to corrode. Just take two seconds after you are done washing your hands to remove excess soap from the handles.

When having a consultation about a job with the plumber, take the opportunity to get to know them andtheir business better. Ask about their experience with the type of job that you are wanting to have done. Being comfortable with your contractor is important. They may be spending significant amounts of time in your house depending on the complexity of the job. You want to be convinced that they're up to the task.

Protect you plumbing pipes! If you live in an area which has cold winters and are leaving your home for an extended amount of time, protect your plumbing while you are gone! Shut off the main water valve! Drain the system of water by opening the faucets at the highest and lowest points of the house. Also, make sure that you have left some heat on in the house! Set the thermostat to at least 55 degrees Fahrenheit.

One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won't hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.

When it comes to plumbing a great choice is to invest in brass fittings. Sure, they may be more expensive upfront, however their longevity is amazing compared to the alternatives, so you end up saving money. As an added bonus, the brass fittings look so much better than the other alternatives.

If your water bill seems unusually high and you haven't changed your water usage, the problem is most likely in the service line. The cost to hire a professional to find and repair the service line most often is far greater than installing a new line and then having the old one shut off permanently.

If you notice that water is dripping behind your walls, you must turn off the water main and telephone a plumber. This type of leak is not something to play around with, as it can cause numerous serious problems. Many initially small problems can lead to hazardous mold, mildew or flooding.

When facing temperatures below freezing in the winter it is important to leave the hot water dripping. This makes sure that the pipes don't freeze over and saves you the expensive repair of fixing and or entirely replacing a broken pipe. The slight cost of dripping hot water is well worth saving you from that large expense of replacing a broken pipe.

The most common cause of leakage with compression faucets is the washer. If you have a leak, unscrew the handle and remove the escutcheon with a screwdriver. Pull the stem and see if the washer is still intact. If it isn't, you know where your problem is.

If you are remodeling your house, take pictures of the inside of your walls, ceilings and floors. You will be able to have a clear idea of where your pipes are located in case you need to do maintenance later. You should also consult your pictures if you want to drill holes in your walls.

These tips should have given you some much needed insight on where to start and how to begin with your own plumbing jobs at home. These tips were thoughtfully compiled to help the plumbing beginner learn the basics and some other cool techniques that are simple enough to use for everyday maintenance and repair.