Today,  water floating feed  maker technology is  incredibly popular in the  manufacturing of aquafeeds, as it can be used to  create a  selection of feeds, whether  drifting or sinking,  relying on the needs of each species.  Additionally, the extruded feed made by  marine  drifting feed machine has less  deterioration  as well as high  effectiveness,  aiding to  enhance digestibility.

 

During the aquatic floating feed machine extrusion  procedure, mechanisms such as temperature,  moisture, pressure will  enhance starch gelatinization,  decay  and also soften the cell wall and release some  conveniently  absorbable  materials,  hence  advertising the digestion  as well as absorption of farmed animals.

 

1.





2.





3.





4.

 

 Via  marine floating feed machine extrusion technology, it is  feasible to  hinder certain protease  preventions (such as antitrypsin), destroy pathogens in raw materials or  adjustment protein  residential or commercial properties to  more  boost the contact with enzymes in fish and shrimp,  assisting to digest food  extra easily.

 

Related post: Fish Feed Factory Cost

 

Extruded feed made by aquatic floating feed machine can  regulate the content of compounds  and also  aid  much better  detoxing. At the same time, the longer stabilization time in the water (12-36 hours)  aids farmers to observe  and also control the feeding  timetable.

 

Although extruded feed made by  drifting fish feed making  equipment has obvious advantages over pelleted feed, the  first investment cost of extruded feed  manufacturing is  greater, resulting in higher feed  expenses.

 

 But also for high-end fish farming, more and more  individuals are  taking note of the market prospect of  premium fish feed.

 

 

1. Main features of  water floating feed  maker.

 

Feeding,  rotating cutting, and main drive all  embrace frequency conversion speed  law system, which has  solid power, stable  procedure, energy  conserving, high aquatic production  effectiveness,  long lasting  devices, low  failing rate, and convenient operation and  upkeep.

 

The screw of floating feed machine is  constructed from alloy material by special  procedure, the  life span is 3-4 times longer than that of domestic  comparable  makers,  and also the  expense of  creating feed is low; the  fractional combined screw is suitable for a  variety of  resources  as well as  even more  varied  items.

 

Automatic lubrication system of the  drifting feed  maker  lowers mechanical energy  usage  as well as  lengthens  life span.

 

The feeding system  takes on spiral forced feeding,  as well as the feeding is uniform  as well as wide. It can be  furnished with an  automated feeding system. The feeder is a screw  communicating variable  regularity speed control to  readjust the feeding  total up to  regulate the puffing  result ( measurable feeding,  as well as can  successfully  avoid the material from  curving).

 

Related post: https://www.richipelletmachine.com/fish-feed-factory/

 

Linear bearing  device  change system,  readjust the  device  precisely  and also quickly.

 

The twin-screw of floating feed  equipment has self-cleaning  feature, and the use of  tools is more reasonable  as well as convenient.

 

Update the  setup of  numerous  devices technology  and also  devices to make the output of the twin-screw  drifting feed  maker larger.

 

Different screws  and also length-diameter  proportions can  satisfy different production processes.

 

 Aesthetic automatic  temperature level control system to make  temperature level control  much more intuitive  as well as  criteria  much more accurate.

 

The overall  drifting feed  device  arrangement The operation of the fish feed pellet extruder is more  instinctive  as well as the maintenance is more convenient.

 

Dry  blowing process  takes on self-heating method without  heavy steam system, which is  much more in line with the  real needs of users.

 

No adhesive is  required to  refine the floating feed,  as well as it can  keep stability in water for  greater than 12 hours.

 

 Tiny and medium  devices is especially  ideal for  clinical research  establishments,  unique  reproduction  ranches or medium  as well as  little feed  manufacturing facilities. There are  likewise  specifically customized  speculative twin-screw  drifting feed  equipments available for  clinical research units.

 

2. The difference  in between pellet feed  as well as  squeezed out feed.

 

With the  growth of the floating fish feed processing industry,  2  commonly used  innovations  presently  utilized to produce aquafeed are pelleting  as well as extrusion by  drifting feed machine.  Contrasted to natural baits, such feeds have higher  dietary  web content and stability, less  wetness,  much easier storage, fewer pathogens,  as well as longer  storage space times.

 

Pelletizing by floating feed machine is a  method of compressing  tiny pellets of  resources  right into larger pellets,  throughout which humidity, temperature  and also  stress can greatly  impact the  high quality of the feed.

 

 Among the  primary  benefits of pelleted feed is  reduced  manufacturing  prices. However, it has some  downsides.

One of the  most significant disadvantages of pelleted feed is that it sinks faster  and also dissolves  promptly in water (according to  data,  concerning 10-15% of feed is  thrown away), which  indicates higher feed  prices, lower farming  revenues,  as well as  much easier cause water  air pollution.

 

Related post: floating fish feed extruder machine

 

3.  Pick pellet feed or extruded feed?

 

Farmers, choose pellet feed or extruded feed?

 

When  selecting feed, farmers  ought to consider the  attributes of different aquatic  varieties  as well as feeding  practices.  Since the habit of shrimps  as well as crabs is to  locate food at the bottom,  and afterwards eat the food slowly, so the food  needs to not be  also  difficult  as well as not  quickly soluble in water.

 

 Consequently, extruded sediment by floating feed  device is the best choice because it is soft  and also  challenging to dissolve in water,  and also it is convenient for shrimp and crab to  consume,  decreasing feed waste and  decreasing water  air pollution.

 

 Particularly in  extensive shrimp farming, extruded feed  needs to be  leading,  due to the fact that it is  simpler for shrimp to  absorb protein from extruded feed, which  lessens feed waste and promotes  far better protein absorption.

 

At the same time, we can also  enhance the absorption  price of the feed by adding beneficial  microbes or stimulating  gastrointestinal products to the feed.

 

 Nonetheless, from a long-term point of view, the use of extruded feed, which is made by  drifting feed  maker  will certainly  raise the  expense,  and also if the fish  usage  squeezed out feed in the mature period, it  might  result in fish fat, large  tummy, poor stress  capability, not  ideal for long-distance  transport, etc,  causing a  low cost at the time of sale.

 

 Consequently, in the process of  tank farming, when  several farmers  make use of feed, they  commonly  make use of a combination of pellet feed and extruded feed, which not only  manages water quality,  lowers feed residues,  yet  additionally improves  efficiency and economic benefits.

 

At the same time, the  tank farming  sector is promoting the  more  advancement of the two feeds  as a result of their respective  benefits.

 

Recommended Site

 

 

4.  Setup of  drifting feed  equipment.

 

( 1) Installation of  drifting feed machine  pipe  shelf.

The choice of the installation  placement of the  pipe rack  relies on the site  area,  yet it should not be too  much from the  major engine. Far from the  major engine  will certainly cause waste of  products during  pipe connection on the one hand,  and also  create the hysteresis of the control system on the other hand.

 

If the installation  place on  website  permits, the best position of the pipeline rack is to be  straight behind the  major engine  as well as conditioner, parallel to the main engine,  and also  regarding 1 meter  far from the main engine (there is a  particular  upkeep space), while ensuring that the pipeline rack is  readjusted upwards. The  setting of the  heavy steam line  user interface of the conditioner  gets on the side of the conditioner.

In order to  promote the  cleansing of the ground  and also the outflow of waste water in the future, the pipe rack  must be raised by about 10  centimeters  throughout  setup. In the installation of each valve in the pipeline, the  setting of the valve wheel should  satisfy the  requirements of  practical operation for  drifting feed  equipment.

 

( 2) Installation of  drifting feed machine control box.

In order to  promote the  procedure, the installation  placement of the on-site control box  ought to be selected near the bypass,  as well as a  specific  area  needs to be  scheduled between the bypass  as well as the control box to  momentarily  put the wastes  moving from the bypass.

 

The distance between the frequency converter of the  reducing  electric motor  and also the  rotating positioner of the on-site cutter  ought to not be too far. It is controlled by voltage. If the distance is  also  much, it  will certainly cause voltage  variations and  influence the cutting  impact.

 

The circulating  temperature level  screen instrument on the on-site control box is to  present the  temperature level of each end of the puffing  dental caries in real time,  as well as the displayed temperature sequence has  particular requirements.  Area 2 Expansion  tooth cavity ...  till the  product discharge  growth cavity, this  series needs to be paid attention to when  electrical wiring the electric control.

 

 Additionally, there are 4 nozzles on the water inlet  pipe of the dual-shaft differential conditioner of  drifting feed  device. They  manage the opening of each nozzle  with the  electro-magnetic cut-off valve.

 

The  drifting feed  equipment conditioner inlet nozzle  switches over 1 to 4 on the control box  represent the conditioners The  first nozzle to the  fourth nozzle from the feed end.

 

 

In order to  decrease the feed  price and fish diseases in  tank farming  ranches, Richi Machinery has  released a  drifting fish feed making  maker; the fish pellet feed  created by the fish feed pellet extruder can  properly  stop  and also control fish  illness.

 

1.

 

Related post: Floating Fish Feed Extruder Machine

 

1. Use of floating fish feed making machine

Fish feed pellet  device is  commonly  utilized in  big, medium  and also small aquaculture, grain feed  handling plants,  animals  ranches, poultry farms,  private farmers and  tiny  and also medium-sized farms, farmers or large,  tool  as well as  tiny floating fish feed production line.

 

2. Precautions when  utilizing  drifting fish feed making  equipment

 

① When the fingerlings are stocked, when the water temperature is low, the growth is slow, and the size is small, the pellet  size of the feed  need to be controlled at  concerning 2mm; when the temperature  climbs  as well as the  development of fingerlings is  increased, the diameter of the feed pellets in the mid-term should be 3-3 .5 mm,  and also  later on in 4-4 .5 mm.

 

 For that reason, when using the floating fish feed making  device to process fish pellet feed, the size of the feed pellets should be  readjusted according to different  durations to achieve  the most effective feeding effect.

 

Related post: 

https://www.richipelletmachine.com/floating-fish-feed-extruder-machine/

② Because the fish has no  tummy, the feed stays in the  digestive  system for a very short time,  as well as the  food digestion  and also  use  price is not high; therefore, when feeding the feed, it should be fed several times, and each feeding  must be a little less feed  application.

6.





7.





8.





9.





10.

 

③ Fish pellet feed  includes 12% - 14% of water  throughout the  drifting fish feed making  equipment  manufacturing process,  as well as it is  difficult to store for  as well long, so as to avoid deliquescence,  mold, and disease after feeding the fingerlings, so it is best to  generate  and also feed it at the same time.

 

④ In order to  far better  avoid the  launch of diseased fish fingerlings,  including 1% salt to the feed powder  prior to production can  properly  stop the  event of diseases of fingerlings.

 

Related post: Shrimp Feed Mill

 

3.  Efficiency of  drifting fish feed making  device

Scientific and reasonable  architectural design,  easy,  tiny footprint and low  sound.

 

Small floating fish feed making  maker for  completely dry in and dry out, easy to make materials, high output and  reduced energy consumption.

 

This  drifting fish feed making  maker has a high pellet  developing rate,  and also the resulting pellets have high hardness  and also smooth  surface area, which is convenient for storage  as well as transportation.

 

This  version floating fish feed making  equipment is  furnished with Ø1 .5-- Ø20  sort of aperture molds, which are suitable for granulation of  various  products  as well as  accomplish  much better  outcomes.

 

Related post: Fish Feed Production Plant

 

 Adjust to different materials to  guarantee the  important effect.

 

 Easy  procedure  and also  upkeep, safe  and also  reputable

 

Strong  versatility to the  work environment

 

The  drifting fish pellet  equipment body is cast  all at once, the  framework is firm and the appearance is  lovely, and the  life span is long.

 

4.  Benefits of RICHI floating fish pellet  equipment

1) Uniform discharge, smooth pellets,  and also output increased by 50%.

 

2) The produced granules by floating fish feed making  equipment are formed at one time, with high  solidity, smooth surface and  adequate internal ripening, which can improve the digestion and absorption of nutrients. Better for storage.

 

Related post: twin screw extruder for sale

 

3) The  drifting fish feed making  maker has humanized design, small  impact,  reduced  sound,  emergency situation  switch,  straightforward  and also safer  procedure.

 

4) RICHI floating fish food  device can be customized according to  client  demands.

 

5) RICHI  drifting fish feed making machine belongs to the  manufacturing facility  straight sales, there is no  intermediary, the  cost is cheap, the  earnings is  reduced, and it is all  set up  as well as debugged before  distribution,  and after that packed and shipped.

 

6) RICHI  drifting feed making  equipment is packed in plastic (plastic waterproof) before  distribution.

 

7) Before the final delivery, the  drifting fish feed pellet making  equipment is  placed on all-wood packaging, and  the entire  maker is packed in a wooden box to  make certain that the  drifting pellet  device  gets to the  location  securely and without  damages.

 

Related post: 8-10T/H Fish Feed Mill

 

5. Process  make-up of  drifting fish feed extruder:

1) Mixing machine: Add a certain  percentage of water to the raw  products, such as corn flour, rice flour, soybean flour, fish  dish, meat  dish, grain flour, additives,  and so on,  as well as  blend them  uniformly.

2) Feeder: Using the  electric motor as the power for screw  communicating, the mixed raw materials are  moved to the feeding hopper of the  drifting fish feed extruder machine to ensure  hassle-free and fast feeding.

3) Twin-screw  drifting fish feed extruder: In the case of high temperature  as well as high pressure  atmosphere  as well as screw extrusion, the mold can be  changed by adjusting the  procedure to  create  various feeds,  and also the  details pellet  shapes and size can be changed.

4) Conveyor: to  carry the feed to the oven.

5) Multi-layer oven: Most of the ovens are electric  stoves, the  temperature level is adjusted between 0-200  levels through the control  cupboard, and the interior is a stainless steel double-layer mesh bag, which  minimizes the  dampness of feed pellets, promotes the  treating rate, and  enhances the  life span.

 

 

6) Seasoning line: The oil sprayer sprays oil, food attractant, etc. The seasoning drum includes octagonal drum, cylinder, lifting  solitary drum,  and also  dual drum seasoning line. According to the  result and  item  homes, the oil is  splashed  externally of the feed,  and also sprayed at the same time. Minced meat and  seasonings,  spray  uniformly.

7) Cooling  and also conveying:  lower the  temperature level of frying  and also feed,  advertise the solidification of oil,  minimize the temperature of pellets,  and also  promote  product packaging.

8)  Shaking  filter: sieve off excess  exterior  product and pellets at the end of the year to  make certain the quality  as well as the reuse of  basic materials.

9)  Product packaging  device:  hands-on  securing  device and automatic packaging  equipment can be  made use of.

 

 

6.  Concerns about floating fish feed making  maker

 

（ 1 ） Q: Which is  the most effective  little  drifting fish feed making machine?

 Solution: At present, there are  numerous  makers of small  drifting fish feed pellet machines, which are mixed. In order to avoid purchasing  equipments with  low quality,  individuals should choose regular  producers to  purchase them.

 

A professional floating fish feed making  device manufacturer  ought to have the  complying with three  factors:

A  normal  drifting pellet  device  supplier.

 Superb  equipment quality,

Perfect after-sales  solution.

 

 

（ 2 ） Q: Is the small floating fish feed making  device  sturdy?  just how much is it?

 Solution: You must  know with the small  drifting pellet  maker. What is the  impact of this  maker? Is it easy to use? This floating fish feed making  maker is a feed processing  devices  particularly  created for breeding  chicken.

The compound feed formula has a  range of raw materials. Nutritional  equilibrium.

 Lower  condition  as well as  boost survival  price.

Save feed cost for  dog breeders  and also improve  financial  advantages. The  details  cost  calls for the  individual to  identify the model  initially,  and afterwards  allow the floating pellet  device  maker quote.

 

（ 3 ） Q: How much is the  cost of the small  drifting feed extruder  maker?

 Response: The  crucial  variable for the  cost of the  tiny floating feed extruder machine  depends on the  result,  resources and power. The higher the  result, the higher the  rate of the  matching  drifting fish feed making  device,  as well as the  better the power, the higher the  cost.

 For that reason,  prior to  acquiring,  initial  choose how much  result you want,  and afterwards  allow the  drifting fish feed making  equipment  producer give an  exact  quote.

 

（ 4 ） Q:  Just how much is the small fish feed pellet  equipment?

A: The power of the small floating fish feed making machine is 2.2 kw with two-phase  power,  and also the hourly  outcome of feed pellets is about 60-100  kgs. The  rate of a high-quality  equipment with a motor  has to do with 2000-200000USD.

 

（ 5 ） Q: What is  drifting feed  device  rate?

 Response: Thefloating fish feed pellet mill is a multi-functional feed pellet  maker, which can be used to process  pet feeds such as  poultries, ducks,  as well as geese, improve the survival  price. The price is 2000-200000USD.

 

With the  fast development of the  tank farming  market,  typical farming methods  have actually been  much from  satisfying people's  requirements. The  needs for  tank farming fish feed made by fish feed extruder  equipment are not  just  well balanced  nourishment,  great  security of the feed in water, no  contamination to water  high quality, etc,  and also  much more  rigid  demands are  advanced for the  ecological quality of fish survival.

 

The feed produced by the aquaculture fish feed extruder  device is hard pellets, and the other is the extruded feed pellet  device, and the processed fish feed is soft pellets.

 

Related post: floating fish feed extruder machine

 

Today, Richi  Equipment  will certainly  discuss the extruded feed fish feed extruder  device. The  manufacturing process generally  embraces  second  squashing  as well as  additional ingredient  blending, and then passes through extrusion,  drying out,  outside spraying,  cooling down,  squashing  and also screening to complete the processing of  water extruded feed.

 

1.

 

1. Raw material  cleansing  as well as  key grinding.

 

There are  typically two forms of raw materials used in  drifting fish feed  manufacturing facilities: one is powder, which does not need to be coarsely  grated. For this kind of  basic material, it can  straight  get in the  cone-shaped cleaning  display to  get rid of impurities after  travelling through the feeding pit  and also  lift,  and after that conduct magnetic  splitting up,  and also directly  go into the batching bin through the distributor or screw auger to  join the first batching.

 

The material that needs to be coarsely  shattered-- granular material. This kind of material  goes into the cleaning equipment  with the unloading pit  as well as the  lift to  go into the cleaning equipment for magnetic  splitting up of  pollutants,  and afterwards  gets in the to-be-pulverized  container.

 

For  private  resources, such as shrimp shells, they can be  straight  taken into the silo to be crushed after magnetic separation without  first sieving.

 

Related post: fish feed mill

 

One-time  rugged pulverization is the pretreatment  procedure of ultrafine pulverization in aquatic feed processing. Its  primary  function is to  decrease the pellet  dimension  distinction  and also variation range of  products,  boost the  functioning  problem of the ultrafine pulverizer,  as well as  boost the  functioning efficiency and guarantee of the ultrafine pulverizer.

 

The  item  top quality is  secure; at the same time, in order to improve the  workplace of  employees  and also  lower cross-contamination, it is  suggested to  utilize an independent  dirt  elimination air  internet, that is, an independent  dirt  elimination system for the feeding port.

 

2. The first batching and mixing.

 

The first batching is  generally the  prep work of public  resources, that is, the preparation of larger materials in the formula. This fish feed extruder  maker  procedure is  primarily completed by  digital batching  ranges.

 

However, in the  initial batching  procedure,  unique  interest should be paid to the arching problem of the batching bin, which is  generally  brought on by the light  mass  thickness and  bad fluidity of the raw materials of the  water feed, especially the  state-of-the-art  water feed  resources.  For that reason,  particular anti-arching  steps  must be taken for the batching  container, such as  making use of eccentric discharge,  resonance  electric motor, etc.

 

The single-shaft horizontal ribbon mixer can be used for the  initial mixing,  and also the grease addition system  have to be  taken into consideration on the mixer. The  very first batching  and also  blending is also the pre-treatment process of ultra-fine pulverization.

 

Related post: Shrimp Feed Making Machine

 

This  complementary  tools of fish feed extruder  device is  primarily to reduce the variation  variety of  product pellet  dimension, improve the working  problem of the pulverizer,  boost the working efficiency of the pulverizer,  and also  make sure the  high quality of the product.

 

 

3. Secondary crushing  and also  blending of secondary ingredients.

 

Due to the low food intake, short  gastrointestinal tract and  bad  digestive system ability of  water  pets,  water feed  calls for  really  great  squashing pellet  dimension to  raise the  area of the feed,  boost the  call  location  in between the digestive juice of aquatic animals  and also the feed,  and also  enhance the ability of  water animals to feed the feed.

 

At the same time,  as a result of the low intake of  marine animals, the  blending  harmony of the feed is  needed to be  shown in a  smaller sized  variety, which also  calls for the  water feed to have a finer pellet size.

 

 As an example, the shrimp feed  must all pass through the 40-mesh analytical sieve,  and also the content on the 60-mesh  screen  must be less than 5%, so the micro-grinding  procedure  should be  embraced.

 

In the  second pulverization  procedure, the  products mixed in the first time are  raised by the elevator and then enter the silo to be  crushed,  and after that  go into the  mini pulverizer. Micro-pulverizers are  usually used in the  handling of  water feeds, and vertical-axis micro-pulverizers are  usually  made use of, which are  furnished with powerful wind  splitting up  tools,  and afterwards enter the  rotating grading screen for  testing.

 

Related post: Sinking Fish Feed Machine

 

The  objective of configuring the rotary grading screen  right here is  mostly to  get rid of the fine fluff formed by the  crude fibers in the feed during the pulverization process, because the  presence of these fine fluff is easy to  stick to the die  opening of the fish feed extruder  device until the die hole is  obstructed,  creating Shut down for cleaning, so it  needs to be removed.

 

The cleaned  products are subjected to  second batching and  blending.  Because the fineness of the  products entering the  additional batching mixing  container is above 60 mesh  and also the density is small, special  interest  needs to be paid to the phenomenon of arching.

 

In order to  avoid this phenomenon, on the one hand, the eccentric sub-expansion hopper can be  utilized,  and also on the other hand, all the  product discharge  makers that  have actually  undertaken ultra-fine grinding  utilize an impeller feeder, which not  just has an arch breaking mechanism,  however  additionally can flexibly  readjust the flow rate. size.  Different  resources  get in the secondary mixer after  additional batching.

 

There is an  synthetic feeding port  over the  additional mixer, which is  primarily used for the addition of trace additives. At the same time, there is a liquid addition mechanism on the mixer for the addition of grease; one is for the  enhancement of water. In the  additional  blending process,  numerous  products  have to be fully  blended, and the coefficient of variation  curriculum vitae is less than 7%, which is the  vital to  making certain product quality.

 

 Consequently, the mixer  has to  pick a model with excellent  efficiency, such as double-shaft  straight paddle  blending It has high mixing  harmony, high  outcome  and also  rapid mixing speed. After  second  squashing  and also  second  active ingredient  blending, the  product enters the  succeeding  procedure-- expansion granulation process-- with fish feed extruder  device.

 

4. Extrusion process by fish feed extruder machine.

 

In the extrusion process, the  product  in fact  goes through a cooking process under the  problems of high temperature, high  moisture  as well as high pressure.

 

During this fish feed extruder  maker process, the physical  and also chemical  homes of the material  altered strongly,  and also  presently when the material was  squeezed out from the die  opening, the water in the feed was immediately  transformed from  fluid to  aeriform state  as well as  released from the feed  due to the fact that the  stress  instantly  went down from high pressure to  concerning 100kPa.

 

 Consequently, the material is extruded by fish feed extruder machine to form the so-called extruded feed.  Since this kind of feed not only has the advantages of  basic  tough pellet feed -  great palatability,  prevents automatic grading of products, is  simple to  move,  assists digestion, reduces waste in the feeding process,  and so on, but also has  one-of-a-kind  benefits:.

 

In the feed, the starch has a high degree of gelatinization by fish feed extruder  device, the protein is  much more  absorbable,  as well as the  application rate of the  pet feed is improved; it has  outstanding floatability, which is easy to observe the feeding situation of the fish, and can  manage the water  air pollution to the  optimum  level. These are also the  major  reasons extruded feed is widely  made use of.

 

Related post: https://www.pellet-richi.com/fish-feed-extruder/floating-fish-feed-machine.html

 

There are many kinds of dryers can be  utilized after fish feed extruder  device. When the  size of the pellets is less than 4mm, a  shaking fluidized bed  clothes dryer can be selected; when the diameter of the pellets is  higher than 4mm, a belt  clothes dryer can be selected, or a horizontal float  clothes dryer can be directly selected.

 

 Since this kind of dryer can make the material in a semi-suspended state on the entire  display surface, it can not  just  guarantee the  drying out  impact, but  likewise minimize the damage to the pellets. After the  product is  dried out, it enters the  outside spraying system.

 

The  outside  splashing of the pellets is  generally to  satisfy the fish's  power needs and  lower the loss of heat-sensitive substances during processing. The nutrients that  ought to not be  included the previous  procedure can be supplemented by  exterior spraying,  and also at the same time, the palatability of the feed can be  enhanced  and also the powder content can be  minimized.

 

The  maximum working temperature for this process is around 80 ℃. After the material  travels through the  exterior  splashing system, it can  go into the counter-flow  colder for cooling.

 

5. Finished product packaging.

The  cooled down material is lifted by the  lift and then  squashed into the  airplane rotary  display for  category. The grading  screen used after fish feed extruder  equipment is  typically a two-layer sieve, and the material on the lower  filter is the  completed product, which can be  straight entered into the  ended up  item warehouse,  and afterwards  evaluated  and also packaged. The  product on the upper  screen  requires to be  gone back to the crusher for crushing. The material under the  reduced  screen is  typically  carefully crushed, which can be  gone back to the batching  container as waste.

 

The fish feed extruder  maker  manufacturing process  evaluated above is the conventional  arrangement of the  present aquatic extruded feed processing  modern technology.  Utilizing this process, sinking feed, slow sinking feed and floating feed can be produced.

 

Although extruded fish feed extruder machine  innovation  has actually been recognized by  several  makers as a new type of  handling  innovation, it  has actually not been  extensively  made use of  due to the fact that its investment is  a lot larger than that of  tough pellet feed  handling  modern technology.

 

 Nonetheless, the fish feed extruder machine  blowing  procedure is the future development  pattern of the feed  handling  market, especially in the application of  water  pet feed  as well as  pet dog feed, and will  certainly  change the  conventional  tough pellet feed  handling  modern technology.

 

I hope the above  associated content  concerning fish feed extruder  maker is  handy to you. For more information  concerning  drifting fish feed granulator  equipment, you  rate to  seek advice from the staff of Richi Machinery, we will serve you  completely!