Smooth Bore PTFE hose offers low volumetric expansion at maximum operating pressure making it ideal for pressure systems such as brake, clutch, power steering, gearbox and suspension hydraulics. Low expansion provides a more positive brake pedal with less travel. It is able to operate at high pressure and temperature while remaining robust and flexible. The PTFE innercore is compatible with virtually all fluids and is suitable for air and gas applications.
High Pressure Smooth Bore PTFE hose is designed for high pressure and high impulse severe duty applications. It maintains excellent flexibility due to superior tension controlled single layer small wire diameter plated braid design.
Brakes, Clutch, Gearbox Hydraulics and Power Steering
Oil and Air Systems
Gauge, Instrumentation and Sensor Lines
(Complies with rules requiring stainless steel braided hose to be
used for fuel pressure gauge lines).
Метки: PTFE hose
Stainless Steel Braided PTFE Hose Line, Length 1 Foot.
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided stainless steel outside which gives them high durability, extreme pressure resistance, and a professional and high-tech appearance.
Inside Diameter: 1/4" (6mm)
Outside Diameter: 5/16" (8.0mm)
Temperature Rating: -100F to 500F (-73°C to + 260°C) under most operating conditions.
Universal - fuel, lube, alcohol, ethanol, coolant and air for automobiles.
Метки: PTFE Teflon
Type:Stainless Steel Braided PTFE Hose
Hose Construction & Material:It is contructed by PTFE inner with a stainless steel outerbraid. This reduces the spongy feel under arduous conditions. It gives a better response in brake and clutch operation. The stainless braided outer gives an excellent resistance to abrasion and corrosion.
Application:Fuel Line / Turbo Line / Hydralic Line
Метки: PTFE Hose
Polytetrafluoroethylene (PTFE) is an engineered fluoropolymer. Outstanding resistance to chemicals is one of its primary attributes. A broad temperature range of -100°F to 500°F (-73°C to 260°C) make this hose material suitable for the majority of fluid and ambient temperature conditions found in industry. An extremely low coefficient of friction, (0.05 to 0.20), provides a non-stick surface. Water absorption of PTFE is negligible, less than 0.01% by ASTM test, and it is FDA-approved for food and pharmaceutical use. Additionally, PTFE will withstand flexing and vibration without failure from flex fatigue. PTFE is chemically inert, it will not break down or deteriorate in service and it has an unlimited shelf life because properties do not change with age or exposure to weather.
Метки: PTFE Hose
PTFE is the most chemical-resistant and the best dielectric of all known plastics,It is not aging and binding,It can be used from -180°c~+260°c under no burthen circumstances.PTFE has the lowest coefficient of friction of all known solid materials.
If filled carbon materilas,it has creep resistance,chemical resistance and low friction advantage.
Types and specifications
other compound materials:
Метки: PTFE Rod
PTFE Rod has excellent all-round properties performing well at both high and low temperatures, being corrosion-resistant, non-stick, self-lubricating and insulating. In addition, it has a low friction coefficient.
Метки: PTFE Rod
PTFE Wire has excellent thermal aging, solder damage, flame, and moisture resistance. PTFE resists solvents, grease, ozone and other chemicals. Low power loss, ideal for high frequency applications.
Application: PTFE non-stick coated wires are intended for electrical or electronic use in protected applications where high temperature will be encountered. The wires have excellent resistance to thermal aging, solder iron damage, flame, and moisture. PTFE coating also resists solvents, greases, ozone and most other chemicals. These wires are easy to install due to their small size and slippery surface. PTFE has excellent, stable electrical characteristics with low power loss, making it ideal for high-frequency applications.
Метки: PTFE wire
* Conductor Size: 26AWG
* Stranding: 19/38
* Conductor Material: Silver-Plated Copper
* Shielding: None
* Jacketing: Polytetrafluorethylene (PTFE)
* 600V Rating
* Color: White
* Temperature Rating: 392°F (200°C)
* Nominal O.D.: 0.038"
PTFE Wire is used in high temperature electronic applications or where abrasion resistance is required. It has excellent thermal aging, solder damage, flame, and moisture resistance. PTFE resists solvents, grease, ozone and other chemicals. Low power loss, ideal for high frequency applications.
Метки: PTFE Insulated Wire
UHMWPE Rod Stock, Virgin Food Contact Grade, UHMW-PE, White Color, Diameter 3/8 In, Length 6 Ft, Diameter Tolerance +/-0.025 In, Length Tolerance +0.060/-0.000 In, Min. Temp. Rating -22 Deg. F, Max. Temp. 180 F, Tensile Strength 5800 PSI, FDA, USDA, and 3-A Dairy Approved
|Standards: FDA, USDA, and 3-A Dairy Approved||Max. Temp. (F): 180|
|Item: Rod Stock||Material: UHMW-PE|
|Color: White||Length Tolerance: +0.060/-0.000"|
|Type: Virgin Food Contact Grade||Min. Temp. (F): -22|
|Tensile Strength (PSI): 5800||Impact Strength (Lbs.): -|
|Diameter Tolerance: +/-0.025"||Diameter: 3/8"|
|Length: 6 Ft||Country of Origin (subject to change): United States|
Метки: UHMW-PE Rod
UHMWPE (Ultra High Molecular Weight Polyethylene) is a common machinable plastic known for durability, versatility and cost-effectiveness as well as abrasion, impact and chemical resistances. UHMWPE plastic features a molecular weight that ranges from 3.1 million to 100 million grams per mole, with an abrasion resistance that continues to improve as molecular weight increases.
Reprocessed UHMWPE is easy to machine with common woodworking tools, making it extremely cost effective, and outperforms metal in many applications. High durability, low friction and wear resistance are key reasons why reprocessed UHMWPE is the material of choice for many applications. Reprocessed UHMWPE can be machined into virtually anything from small gears and bearings to huge sprockets.
Low Coefficient of Friction
Reprocessed UHMWPE is used in applications where high levels of friction are likely to arise including conveyor guard rails, augers and wear strips, belt scrapers, chain guides, and idler rollers. Due to an extremely low coefficient of friction, its inherent lubricity minimizes heat-generating friction that tends to gradually destroy steel parts, and ensures smooth, noiseless operation.
High durability, low friction and wear resistance are key reasons why reprocessed UHMWPE is the material of choice for a myriad of applications. Reprocessed UHMWPE offers an extremely low coefficient of friction due to a specialized built-in lubricant that replaces unwanted grease and oil. It also enhances efficiency and productivity in many applications. Reprocessed UHMWPE self-lubricating formula helps to extend part life because the internal lubricant ensures that parts will not break or need replacement.
Метки: UHMWPE Rod
What is PTFE:PTFE is made up of Fluorine and Carbon atoms. The Fluorine atoms are just the right size to form a helical shield around the carbon atoms. This stops any chemical attack on the carbon atoms because nothing can get close enough. Fluorine is an extremely reactive element and by this virtue the chemical bond between it and carbon is one of the strongest bonds known in organic chemistry. This is why only under extreme conditions can PTFE be attacked. The forces between polymer chains are extremely small which gives PTFE its excellent low coefficient of friction
Properties:Superior chemical resistance;Low coefficient of friction;Near zero stick/slip force;Wide temperature range;Low moisture absorption;High electrical resistance;Temperature range -260 to 260 deg c.
Applications:Aerospace equipment;Semiconductor equipment;Petrochemical plant;Pharmaceutical plant;Corrosive chemical plant;Cryogenic valve seats;RF & microwave antenna use;High voltage applications;
Метки: PTFE Rod
Teflon PTFE Rods are made with virgin Teflon PTFE resins, this material has a slippery surface and surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures. It resists most solvents and is also an excellent electrical insulator. Teflon PTFE Rods can be used outdoors.
Teflon PTFE Rod surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures
Teflon PTFE Rods resist most solvents and is an excellent electrical insulator
Teflon PTFE Rods can be used outdoors
Temperature Range : Minimum -350F to Maximum 500F
Метки: Teflon Rod
The PTFE Paper is a must have item if you are doing heat transfer work. Use a non-stick sheet with your heat transfer press to keep the upper heat platen clean and to prevent colors from bleeding through. To use, all you have to do is place the Non-stick sheet on top of the heat transfer. Non-stick sheet is re-useable . The Non-stick sheets are made of premium grade Non-stick and fiberglass materials. Heat rated up to 550 degrees F.
Метки: PTFE Paper
PTFE Paper Dimensions: 16.8 x 1.2 x 1 inches
PTFE Paper is 100% Resistant to Non-Polar Solvents and rated for direct, long-term, solvent exposure. PTFE Sheet is an ideal liner for collection vessels and evaporation dishes and has excellent heat transfer up to 500F.
Other uses for Slick Sheet are: Packaging for sticky extracts, Liner for various extraction apparatus, Vacuum chamber inserts, Non-stick sleeves for glass on glass joints, Use whenever an ultra glossy appearance is desired
PTFE Sheet is a laboratory grade PTFE film. This Teflon sheet roll is 100% Resistant to Non-Polar Solvents and rated for direct, long-term, solvent exposure. Oil Slick Rosin Paper is an ideal liner for collection vessels and evaporation dishes and has an excellent heat transfer up to 500°F.
Easy cutting, folding and scoring makes it one of the Best PTFE Paper/Sheet Roll which can be used for various extraction apparatus, Vacuum chamber inserts, Non-stick sleeves for glass on glass joints and whenever an ultra glossy appearance is desired. Teflon sheet roll can be the very effective liner for packing sticky extracts. It has excellent thermal and electrical insulation properties and a low coefficient of friction. PTFE is very dense and cannot be processed by melting. With commercial uses, this oil slick Teflon sheet can be used for kitchen and household use as well. It can be a great way to avoid scraping a glass dish every time. It can be even used for the baking purpose. However, repeated folding and creasing can wrinkle the surface and impact non-stick performance over time.
Sharp tools are not recommended for use with the Oil Slick Rosin Paper. For a pristine result, inspect your PTFE Paper/Sheet for airborne debris before each use.
Метки: PTFE Paper
Fluorosint Teflon - PTFE Molded Rod has nine times greater resistance to deformation under load than unfilled PTFE. Its coefficient of linear thermal expansion approaches the expansion rate of aluminum, and is 1/5 that of PTFE — often eliminating fit and clearance problems. It is 1/3 harder than PTFE, has better wear characteristics and maintains low frictional properties. PTFE Molded Rod is also non-abrasive to most mating materials.
PTFE Rod Features:Usage temperature range is very broad (Celsius from - 200 degrees to +260 degrees); Anti-majority chemical substance's corrosiveness, except some fluorides and alkalinity moltenmetal;Excellent mechanical properties, aging resistance;Excellent flame resistance(Conforms to ASTM-D635 and D470 test step),in the air to be regulated as a flame retardant material;Very low water absorption......
Метки: PTFE Molded Rod
PTFE (Polytetrafluoroethylene) is most commonly known as "Teflon" a brand name of the material produced by Dupont. It is a self-lubricating that offers the lowest coeffecient of friction of any material. It also has astonishing chemical resistance along with a service operating temperature of 500F.
Метки: PTFE Molded Rod
Type: Stainless Steel (304 grade) PTFE (Teflon) Made Fuel Line
Condition: Brand New. Never been used or installed
Size: Inside Diameter- 3/8”/ 9.6 mm
Pressure Rating: 1500 PSI - note: crimp-on fittings are recommended for applications over 500 PSI.
Temperature Rating:-100F to 500F (-73°C to + 260°C) under most operating conditions.
Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes.
This Braided Stainless Steel Fuel Hose are specially designed to work in any automotive project.
This PTFE hose provides you with unsurpassed levels of performance and reliability for your tough performance applications. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided stainless steel outside which gives them high durability, extreme pressure resistance, and a professional and high-tech appearance. They are smooth bore for optimal flow.
PTFE is flexible and strong and when combined with stainless steel braid can perform under high pressure and continuous flexing and vibration conditions.
Метки: PTFE Hose
10 Foot Long PTFE Stainless Steel Braided Hose
Great for any type of fuel, chemical transfer, Oil, E85 Ethanol, Alcohol, etc
This hose will outlast any rubber hose, will not get brittle over time or crack.
*Use With PTFE Smooth Bore Fittings*
Buy as much as you want, we can ship one continuous piece , or specify if you want cut.
3,000 PSI Working Pressure
12,000 PSI Burst Pressure.
Метки: PTFE Teflon
Meets FDA and USDA guidelines; 3-A Dairy-approved (natural)
Chemical-, corrosion- and wear-resistant
No moisture absorption
Non-toxic, low-friction surface
Meets ASTM-D-4020-05 of 3.1 to 6.2-million molecular weight
UHMW-PE Rod sets the standard for engineered polymers with a unique combination of wear and corrosion resistance, low friction surface and impact strength.
UHMW-PE Rod is resistant to chemical attack and moisture absorption, and retains key physical properties to -30° C.
An excellent general-purpose material, UHMW-PE Rod is a cost-effective solution for food handling problems, and meets FDA, USDA and 3-A Dairy guidelines for food processing and handling. Quadrant also offers custom colors compounded with FDA/USDA approved pigments, which meet FDA and USDA guidelines for food processing and handling. Whether your business is grain, pharmaceuticals, pizza dough or frozen poultry, TIVAR material will reliably move your materials and products.
Метки: UHMW-PE Rod
Ultra-High Molecular Weight Polyethylene (UHMWPE) is a very tough material, with the highest impact strength of any thermoplastic. It is highly resistant to corrosive chemicals, has extremely low moisture absorption, very low coefficient of friction, is self lubricating and is highly resistant to abrasion (15 times that of carbon steel).
Shape: Round Rod
Diameter: 2.000 (2 inch)
Length: 24 inches
Quantity in Package: 1 piece(s)
Item Weight: 2.6
Notes: Diameter is oversized to allow for finishing to listed size. UHMWPE rods are not rigid and have a semi-memory. In longer lengths UHMWPE rods tend to "bow" or conform to the shape they are stored in.